Terms & Conditions

Warranty and Disclaimer

Powder House Custom Coatings, warranty’s only items coated by PHCC against significant flaking or rusting due to defects in workmanship by PHCC for a period not to exceed SIX (6) months from the date of acceptance, unless agreed upon and documented by both parties. Other coating warranties are to be agree upon (in writing) prior to coating application.

All parts received by PHCC must be able to withstand temperatures of at least 400 Degrees Fahrenheit, PHCC is not responsible for items that may be damaged due to baking of those temperatures.

This warranty excludes any damage to the items due to failures resulting from misuse, abuse, accident, neglect, mishandling, misapplication, alteration or modification of the items which in turn causes premature corrosion or coating failure.

PHCC is not responsible for damage of parts due to media blasting. Potential problems may be discussed prior to blasting. PHCC will not blast parts if the customer does not agree to assume the risk of parts warping, excess blasting media getting in areas of the parts, holes forming in thin areas, or any other damage not described herein.

Cast aluminum, Cast Iron and Brass parts may experience an out-gassing and/or bubbling in the finished powder coat. We will take every precaution to avoid out-gassing; however, we will not be held responsible for bubbling caused by porous casting coated by PHCC.

This warranty does not cover items that may rust or corrode due to improper design, construction or fabrication of the items. Water traps or tight areas may not be able to be coated. These areas lead to premature corrosion and are not the responsibility of PHCC.

Any problem with this item(s) must be first reviewed by PHCC. PHCC reserves the right to determine what action if any will be taken rectify the problem(s). This warranty does not cover repair of the items by any other service provider.

There are no express warranties except as specifically sent forth above, PHCC shall not be liable for incidental or consequential damages resulting from the use of the items or arising out of any breach of this warranty. PowerHouse Custom Coatings will not be responsible for any items not claimed after 3 weeks of completion.